HomeText SearchStructure Searche-Chemicals.comList Your CompanyContactAccountLogoff






























MultiTherm LLC



Country: USA

MultiTherm LLC
11 General Warren Blvd
Malvern, PA 19355


Phone: 800-225-7440
Phone 2: 610-408-8361
FAX: 610-408-8365
E-Mail:E-Mail this Supplier


http://www.multitherm.com/

Contact: Marianne Landi, Cust. Serv. Mgr.; Mark Smith, GM

MultiTherm LLC has been a leading supplier of efficient, non-hazardous and non-toxic Heat Transfer Fluids since 1977. Within a temperature range of 10F to 600F,the company can successfully and economically accommodate a customer's heating or cooling requirements however exacting they may be. Further, MultiTherm provides troubleshooting help and a fluid analysis service to determine the physical and chemical condition of the fluid.

Product List: 10

PON:Page:


 


Products

FLUID ANALYSIS SERVICE
HEAT TRANSFER FLUIDS
MULTITHERM HAS THE RIGHT FLUID FOR YOUR HIGH TEMPERATURE PROCESS APPLICATION AND EVERY FLUID PROVIDES ENERGY EFFICIENT, NON-HAZARDOUS,
LOW VISCOSITY APPLICATIONS THAT ARE RECOGNIZED BY USDA AND FDA.
TEMPERATURES RANGE FROM 0F (-12C) TO 600F (315C) AND ARE OFFERED AS FOLLOWS:


Product List for MultiTherm LLC

MULTITHERM 503 PROVIDES USERS WITH A NON-TOXIC, LOW PRESSURE ALTERNATIVE TO CHEMICAL BASED HEATING & COOLING FLUIDS.
ITS MAIN APPLICATION IS WHERE LOW PRESSURE AND HIGH EFFICIENCY IS REQUIRED.
HEAT LOADS ARE ACHIEVED WITH LOWER FLOW RATES,SMALLER HEAT EXCHANGERS OR LOWER APPROACH TEMPERATURES.APPLICATIONS INCLUDE PLASTICS & CHEM INDUSTRY.
MULTITHERM FF-1 IS AN ECONOMICAL WAY TO REMOVE LOOSE MATERIAL SUCH AS WELD SPLATTER, FINES, AND PARTICULATE MATTER, ETC.
LEFT IN LINES AND EQUIPMENT, ALONG WITH OIL AND SOME PRESERVATIVE COATINGS.
THIS FLUID IS USED IN START-UP AND MAINTENANCE APPLICATIONS AND WHEN CHANGING OVER TO A NEW FLUID
MULTITHERM IG-1 HAS BEEN DESIGNED TO OFFER AN ECONOMICAL ALTERNATIVE AND HIGHLY REFINED THERMAL FLUID FOR TEMPERATURE RANGING FROM 10F (-12C) TO 550F (288C).
APPLICATIONS INCLUDE ASPHALT, PAPER AND PARTICLE BOARD, DIE-CASTING, AND ROOFING COMPOUNDS.
MULTITHERM IG-4 IS A NON-TOXIC DURABLE HEAT TRANSFER FLUID FOR CLOSED LOOP SYSTEMS.
SOME OF THE BENEFITS INCLUDE A VERY LOW PRESSURE SYSTEM, EXCELLENT OXIDATION RESISTANCE, AND A VERY HIGH FLASH POINT (440 F).
CHEMICAL, COMMERCIAL LAUNDRIES, DIE TEMPERATURES, AND ASPHALT STORAGE ARE JUST A FEW OF THE APPLICATIONS
MULTITHERM OG-1 HAS BEEN DESIGNED TO PREVENT OXIDATIVE DEGRADATION AND DEPOSITS IN OPEN AND CLOSED LOOP SYSTEMS.
MULTITHERM OG-1 HEAT TRANSFER FLUID IS DESIGNED FOR A MAXIMUM FILM TEMPERATURE OF 600F AND A MAX SYSTEM BULK TEMPERATURE OF 550F.
OFFERS THE BENEFIT OF HAVING A HIGH FLASH POINT OF 455F / 235C AND VERY LOW VAPOR PRESSUR
MULTITHERM PG-1 IS A HIGH QUALITY FOOD GRADE HEAT TRANSFER FLUID FOR USE IN CLOSED LOOP,
LIQUID PHASE HEATING AND COOLING SYSTEMS AND IS APPLICABLE TO THE CHEMICAL, FOOD PROCESS, PLASTIC, AND DIE CASTING INDUSTRIES.
THE UNIQUE FORMULA OF MULTITHERM PG-1 ASSURES PERFORMANCE WITHOUT THE POTENTIAL PROBLEMS OF MANY CONVENTIONAL FLUIDS.
MULTITHERM PSC PLUS IS DESIGNED FOR USE TO CLEAN OUT HOT OIL SYSTEMS DURING NORMAL OPERATION.
ITS FORMULATED TO BREAKDOWN THE SLUDGE DEPOSITS AND RESIN RESIDUE AS A RESULT OF ITS DETERGENCY.
MULTITHERM PSC PLUS IS COMPATIBLE WITH ALL MULTITHERM FLUIDS AND MOST OTHER PETROLEUM BASED HEAT TRANSFER FLUIDS.


e-Chemicals.com


Chemical Suppliers

Policy & Agreement | Privacy Policy © 2000-2017 ChemBuyersGuide.com All rights reserved